There is no denying how much the cars look better when they are close to the ground, as the car downlink can turn even the ugliest cars into something good and less ugly, and there are a number of benefits that can be gained from the downlink of the car, though there are a number of drawbacks This may harm the vehicle, so this should be taken into consideration when considering the descending procedure.
The history of the car's landing
The car's downing technology has come a long way over the past twenty years or so. In the past, cars were either prepared for comfort and installed on a high suspension system that was leaned through turns and showed many defects, or placed in a lower and more solid place Like "sports cars", for cars belonging to the previous category, the proper landing system was seen as a great way to handle the car, move it, and improve the setup offered by the manufacturer, but a lot has changed since then.
Today, sports cars generally achieve a better balance between ride quality and delivery, as their average lifespan is longer than that of high cars, and they provide good driving comfort and ease of handling, and manufacturers spend millions of dollars in research and development to try to strike an ideal balance between ride quality And use.
Advantages of car tuning
Aerodynamics is better: With a car damping system, there is less air under the car, and this can create better results to draw air on the car, which is why some sports models are landed slightly on the ground.
Improved towing and transportation: In general, having a very low vehicle on the ground can increase the grip of tires on the road and improve handling, however, this is not always the case, as landing in some cases can lead to some problems.
Reduced risk of overturning: Reduction usually reduces the risk of overturning, as the higher the vehicle, the easier it is for overturning.
Greater comfort: Some drivers benefit from the feeling that they feel better with a little lowering of the car, and additional rigidity can be obtained in the descending system, and this is one of the privileges that some drivers mention after descending their cars.
Damage to the car
The first concern when performing a car retrofit is the retrofit process itself, where most car repairs and modifications should be made by a professional, but this is more true in retrofitting works than almost any other type, and car repairs consume thousands, and if appropriate procedures are not followed when making any modifications to Car, as it may cause serious injury or accidents, so this work should always be left to the specialist mechanic.
But assuming that the work is done correctly by the car owner, what are the risks of cutting the car or truck? The most common are:
- Steering geometry may be changed sufficiently that the vehicle cannot be safely guided, this primarily applies to cars that have been retracted several inches or more.
- The downed car may land frequently at the entrances to the driveways or be unable to avoid the normal road, too, in case you need to tow your car, it may not be towed naturally or there is no way to do this without damaging the car.
- A downed car may put additional pressure on different parts of the suspension and steering system, resulting in excessive wear and even early failure. [2]
- One of the most common problems with a car landing system is that the car can more easily press the road when it bounces, speed bumps can also be a problem, and friction with the ground can cause serious damage to the lower parts of the car, which makes the grievances And the exhaust system is particularly vulnerable.
- In some cases, treading can lead to uneven tire wear or cause severe wear patterns, and drivers should look for this result when changing their treading system in any way.
- More serious consequences of landing occur when suspension elements come into contact with other vehicle systems, and the landing system can affect anti-lock braking devices, or even with tire sidewalls, and if the landing is done incorrectly, tire wear can actually occur, which It causes some serious potential risks.
- For those who like to use manual cranes to lift a vehicle for routine maintenance, landing a car can make this simple task much more difficult, so you should think about your access needs before turning your car tire down to the ground.
- All of these are important considerations for car owners who want to tamper with the landing system that came directly from the factory, and experts recommend paying extra money to handle high-quality shocks and other parts, avoiding cheap aftermarket systems that can cause failure or other serious dangers on the road.
